{"id":1720,"date":"2019-05-15T11:44:25","date_gmt":"2019-05-15T09:44:25","guid":{"rendered":"https:\/\/www.fdueg.com\/reattanze-per-sala-prove\/"},"modified":"2022-07-07T17:36:20","modified_gmt":"2022-07-07T15:36:20","slug":"testing-lab-reactors","status":"publish","type":"page","link":"https:\/\/www.fdueg.com\/en\/testing-lab-reactors\/","title":{"rendered":"Testing lab reactors"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″ el_class=”sx” css=”.vc_custom_1555578073404{padding-right: 60px !important;padding-left: 60px !important;}”][vc_empty_space height=”25″][vc_column_text]FDUEG has supplied its inductive load to testing facilities<\/strong> for many years. The deep and wide experience of the technical personnel, together with a careful analysis of each case study aimed at attaining a result that is compliant to the specifications, allowed the company to achieve a leading position over this market.<\/p>\n

If it is needed to cause a voltage drop on a power line in order to control the current and its power factor, using a reactance is the best solution<\/strong>. Heat generation is almost completely cut, while the reactive power drawn from the supply can be compensated through the usage of capacitor banks: this way, also the overall current absorption can be relatively low.<\/p>\n

Thanks to this advantage, the principal solution to finely tune the voltage of a test lab involves using reactor banks; this in particular holds for very low impedance loads and high currents, such as contactors or circuit breakers.[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″][vc_single_image image=”1721″ img_size=”full” alignment=”center” onclick=”img_link_large”][\/vc_column_inner][vc_column_inner width=”1\/2″][vc_single_image image=”1730″ img_size=”full” alignment=”center” onclick=”img_link_large”][\/vc_column_inner][\/vc_row_inner][vc_column_text]<\/p>\n

Testing lab reactors: Load reactors for short circuit tests and Filter reactors for testing facilities<\/h2>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Test lab reactors: product typologies<\/h3>\n

FDUEG proposes its test lab reactors <\/strong>mainly as coreless bobbin configuration. Air core reactors<\/strong>, in fact, allow to sustain any current variation without saturation effects. If compactness is needed, iron core pieces with the same ratings can be studied and proposed as equivalent alternative.<\/p>\n

The engineers and the technical personnel within the Engineering Department take care of the comprehensive development of these products: this stage comprehends a study for inductive values, mechanical structures and control logic for load insertion.<\/p>\n

The devices realized to withstand a voltage level up to 36 kV<\/strong>. However, requests for equipment bearing higher voltages can be studied upon specific request from the customer.<\/p>\n